Industrial Safety Belt Climbing Belt Safety Body Belt

Function: the fall factor is a ratio used to evaluate the special situations where hazards occur when working at heights. Generally, the calculation formula of fall factor is: Fall factor = fall height / rope length. The systems including fall prevention factor include: restriction, positioning, fall prevention, etc. Aegle Safety Belt is generally applicable to the above three systems.

1. Restriction: technology used to prevent workers from entering areas with falling risk (such as positioning belt and safety rope en358);

2. Positioning: provide safe positioning for workers in a risk area where the fall factor is not determined (e.g. hanging under the connection point and equipped with positioning belt en358 on the tensioning rope);

3. Fall prevention: technology used to eliminate or reduce the impact force caused by falling from height (such as using fall prevention safety rope en361 and buffer belt en355);

45mm polyester webbing, minimum breaking strength 22kn

I. stamping alloy steel D-ring is adopted, with the minimum breaking force of 22kn and stamping alloy

The maximum breaking force of steel snap fastener is 18kn

-The plastic parts are made of environment-friendly degradable materials, with high-strength stamping resistance and one anti falling hanging point on the back

One chest, three abdomen, one leg and two adjustment points

I. maximum bearing capacity: 100kg

I. scope of application: wind power installation, high-altitude rescue ship construction, outdoor mountaineering

Contact us if you need more details on Full Body Safety Belt. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Safety Body Belt、Industrial Safety Belt. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : High Quality Safety Belt